Photoelectric Sensor G12-3c3nb Infrared Photoelectric Proximity Switch Sensor

• Customization: Available
• Type: Diffuse Reflection Type Photoelectric Sensor
• Output Signal Type: Switching Type
• Model NO.: G12-3C3NB
• Production Process: Normal Wirewound
• Material: Metal
• Feature: SemiConductor
• IP Rating: IP67
• Certification: CE
• Customized: Customized
• Mounting Type: Cable
• Current Consumption: Below 10mA
• Control Output: Below 200mA
• Detection Distance: 15mm
• Head Type: Flush
• Transport Package: Exporting Standard
• Specification: Single package size: 14X12.5X6 cm
• Trademark: annele
• Origin: Wenzhou

Product Description

photoelectric sensor G12-3C3NB infrared photoelectric proximity switch sensor

        

Model No.	G12-3C3NB
Working voltage	10-30VDC
Output form	NPN
Output state	NC
Outward appearance	Cylinder type
Shell Material	Metal
Protection grade	IP67
Detection distance	3m
Detection type	Trough beam

Model composition and definition of infrared ray photoelectric switch
G  18  3  A  10  N  A
1   2   3  4   5   6  7  8
No.	Composition	Code and definition
1	Basic form	G: infrared ray photoelectric switch
2	Outward appearance code	18,50,76
3	Working voltage	2.90-250VAC 3:10-30VDC 4:12-240VDC/24-240VAC 5:Special voltage
4	Detection way	A: diffused reflection type(scattered reflection type)
		B: feedbace reflection type mirror(mirror reflection type)
		C: penetration type(correlation type)
		D: marking detection type
		G: optical fiber type
5	Detection distance	05: 5cm 10: 10cm 30: 30cm 101: 10m
6	Output form	N: NPN transistor output     P:PNP transistor output     J: Relay contact output         L:AC two-wire output     S: with two outputs: NPN and PNP
7	Output state	A: Normally open(light entering ON)      B: Normally close(light sheltering ON)
		C: Normally open+ normally close
8	Subsidiary	T1: front delay   T2: rear delay   Y:oil proof T: with aviation connector   I: special requirement

 

G series proximity photoelectric switch sensor

Structural category				Photoelectric switch
Outward appearance code				G12	G15	G16
Outward appearance illustration
Diffuse type	Detection distance			7cm	10cm	10cm
	10- 30 VDC	NPN	NO	G12 -3A 07NA	G15 -3A 10NA	G16 -3A 10NA
			NC	G12 -3A 07NB	G15 -3A 10NB	G16 -3A 10NB
			NO+NC	-	-	-
		PNP	NO	G12 -3A 07PA -	G15 -3A 10PA	G16 -3A 10PA
			NC	G12 -3A 07PB -	G15 -3A 10PB	G16 -3A 10PB
			NO+NC	-	-	-
	90~250 VAC	SCR Controllable Silicon	NO	-	-	-
			NC	-	-	-
		Relay output		-	-	-
Retrore-flictive	Detection distance			1m	1m	1m
	10- 30 VDC	NPN	NO	G12-3B1NA	G15-3B1NA	G16-3B1NA
			NC	G12-3B1NB	G15-3B1NB	G16-3B1NB
			NO+NC	-	-	-
		PNP	NO	G12-3B1PA	G15-3B1PA	G16-3B1PA
			NC	G12-3B1PB	G15-3B1PB	G16-3B1PB
			NO+NC	-		-
	90~250 VAC	SCR Controllable Silicon	NO	-		-
			NC	-		-
		Relay output		-		-
Trough beam	Detection distance			3m	3m	-
	10- 30 VDC	NPN	NO	G12 -3C 3NA	G15 -3C 3NA	-
			NC	G12 -3C 3NB	G15 -3C 3NB	-
			NO+NC	-	-	-
		PNP	NO	G12 -3C 3PA	G15 -3C 3PA	-
			NC	G12 -3C 3PB	G15 -3C 3PB	-
			NO+NC	-	-	-
	90~250 VAC	SCR Controllable Silicon	NO	-	-	-
			NC	-	-	-
		Relay output		-	-	-
DC/SCR/Control output				DC:200mA		DC:200mA,AC:300mA
DC/AC Consumption current				DC<15mA		DC<15mA,AC:<10mA
DC/AC Response time				DC<2ms		DC<2mS ,AC<20mS
Directional angle				3°-10°
Directed object				Transparent or opaque body
Working environment temperature				-25ºC ~ + 55ºC
Intensity of illumination of working environment				Sunlight under 10000LX incandescent lamp under 3000LX
Shell material				Metal	Plastic, Metal	Plastic
Protection grade				IP67	IP67	IP67

 

 

 

 

 

WORKING PRINCIPLE PHOTOELECTRIC SWITCH

The working principle of the photoelectric switch is that when the beam emitted by the emitter is blocked or partly reflected by the object, the beam receiver whereby makes a judgment and reacts.The working principle of the photoelectric switch is that when the beam emitted by the emitter is blocked or partly reflected by the object, the beam receiver whereby makes a judgment and reacts.

 

 

 

 

FAQ

1.How and how long can I get a sample to check your quality?can I expect to get the sample?

----After price confirmation, pay the sample charge and send us confirm files, it will be ready for delivery in 3-5 days.
----You can use your own express account or prepay us if you do not have an account.

2.Can you do the design for us?

----Yes. Send us images, Logo, text and tell us how you would like to arrange them.We will see if we can meet your needs and
answer you as soon as possible.

3.What about the lead time for mass production?

----It mainly depends on the order quantity and the season you place the order. Generally , order products in advance,arrange in
advance.

4.Can I have a visit to your factory before the order?

----Of course! Welcome! Our factory address:  NO. 3777,Iiujiang Road, Liushi , Yueqing City, Zhejiang
Province, P.R. China.

5.What's your shipment method?

----We ship by Express, by air, by sea, by train. We check and compare different methods and also consider the views of our
customers , then chose the most suitable one.

6.How to order our product ?

----First need tell us the model and quantity and other request you need.
----Second we make the PI.
----Third you confirm the PI and pay the order ,we arrange the goods for you.
----Fourth when the goods are ready , we tell you the tracking number.

7.If I want to release order, what's the payment method you accept ?

----We accept T/T, Paypal, L/C,etc.